My experience of smarter living

This is the conclusion to a series of articles in which I explored Remote Heating Control – a technology of the future. Learn more about this series by reading the introductory article, called stepping into the future of smarter living.

Three months ago, I wrote an article in which I told you how British Gas had approached Technology Bloggers and asked if I would like to have Remote Heating Control technology installed for free, to test the technology as part of their don’t take our word for it (DTOWFI) campaign. Remote Heating Control is a technology of the future, and therefore they wanted reputable bloggers to test it out and give their honest feedback in order to help people (consumers) understand the pros and cons of getting the technology, and just generally what it is like to live with an intelligent (or smart) heating system.

Now my part in the DTOWFI campaign is coming to an end – this is the final article in my series. In this article I am going to summarise my journey with the technology, highlight the advantages and disadvantages and give you my honest feedback as to my experience of Remote Heating Control.

I hope that home-owners (potentially you) will be able to use this series to evaluate whether they feel they would benefit from installing Remote Heating Control.

Installation – The Start Of The Journey

My journey with Remote Heating Control started on Thursday the 16th of August, when a British Gas engineer called Nick came to my house and set up the hardware I would need to run the technology.

British Gas remote heating control

My British Gas smart linked thermostat

First Nick installed a wireless receiver near to my boiler. Then he removed my old thermostat and replaced it with a band new LED display, smart linked thermostat. Finally Nick installed a wireless hub which I plugged into my internet router. These three devices now communicate with each other and between them and the myHome internet portal, determine what my boiler should be doing. Clever huh?

For more info on the installation, check out my article on: how is Remote Heating Control technology installed?

First Impressions

In the next article I discussed what my first impressions of Remote Heating Control were. I explored the myHome online interface, from which I was able to control my heating online. Once I had my login credentials, it was easy to login and navigate around the site.

I was impressed with the amount of data and functions that are available to me. For example, I can see what the temperature has been in my house over the last 24 hours, or the last week, or even month. I am also able to see a weather summary, letting me know what the temperature has been like outside recently, and what to expect in the near future.

At the time of writing article three, I was yet to use the technology on a daily basis, as it was mid-September and still relatively warm.

Setting Up A Heating Schedule

Two weeks later (early October) I published my next article, in which I let you know how I found setting up a schedule for my heating. In summary, it was really easy, I just had to choose what temperatures I wanted my house to be and when, and then drag some sliders accordingly to make a rather complex, but easy to understand, schedule.

Remote Heating Control Schedule - Advanced

My heating schedule

My heating is now designed to fit around my daily variations in lifestyle. I get up later of a weekend, so my heating doesn’t come on until later. I go to bed later on Friday and Saturday, so my heating keeps my house warmer for longer. Instead of me having to adjust my heating to my daily life, my heating now knows what to do and when – meaning little need for interference from me. Check out the article for more on setting up a remote heating schedule.

Daily Changes

From mid-October, I was using my heating on a daily basis, however unlike last year, I wasn’t turning it on and off daily, or controlling it via the thermostat. My heating was doing all the hard work for me, turning itself on just before I woke up/got home, and turning itself off when I went to bed/left the house.

But what happened when my life didn’t fit perfectly around my heating schedule? Say I knew I was going to be home 20 minutes early, would I have to come home to a cold house? No I wouldn’t, thanks to the myHome smartphone app! It was really easy to download and install, and after logging in with my normal username and password, I was able to instantly adjust my heating. Quite literally I could change the temperature to 18°C and in the 10 minutes it took me to get home, my house would have warmed up.

I have found that there is nothing wrong with using my smart linked thermostat (my houses internal thermostat) to control my heating, it works very well in fact, however I just don’t seem to be using it. My heating schedule seems to be regulating things rather well for me, and when I want a change making, a quick alteration on the app, or a text is often much faster and easier.

For more on my views of what the technology is like to use, check out the: using Remote Heating Control on a daily basis article? The article also contains more information about the myHome online portal, what can be found there, what you can control etc.

A Scenario

I recently had the thought, what if I were to go on holiday? My heating is set to a schedule, which I would have to change. I wouldn’t want to have to change the schedule just for my holiday and then reset all the temperatures and time periods when I got home. Well I wouldn’t have to.

All I would need do is login to the myHome app and set my heating to ‘OFF’. It is usually programmed to ‘Auto’ which means stick to the schedule, but were I to set it to ‘OFF’ then it would just lie dormant. When I get back, on my way home, a quick SMS of ‘HEAT AUTO’ or just setting the heating to a specific temperature via smartphone or text message would get my house lovely and warm for my return. It seems that there isn’t much that this technology can’t handle!

Basically if there is going to be a disruption to your ordinary daily life, and you don’t want your heating to be wasting money on unnecessary heating, you can effectively stop the schedule. Likewise if you want your home to be hotter than it is you can override the schedule for that period.

The Money

One of the key factors in the technology for me is the money. I want to be green and save gas, whilst at the same time use the technology to help me save money. So, do I think that Remote Heating Control will save me money?

I haven’t any bills to compare yet, and the weather does vary year on year anyway, so it is hard for me to tell, but from what I have seen so far, my honest answer is yes, I think that the system will save me money.

The way I have programmed my system, it stops my house from getting really cold when I am not there, so it should take less gas to warm it up when I get home. Also the fact that I can instantly change the temperature via the internet, or my phone mean that if I am out of the house, I am still in control, whereas before I couldn’t be. Therefore any mistakes I make – like leaving the heating on when I am going out – I can fix before my boiler burns away my money heating an empty house.

To Conclude

I am really pleased that British Gas asked me to become a part of the DTOWFI campaign, as it has not only given me an insight into the future of smarter living, which I have been able to share with you, but also an amazing system which I now use to control my heating with.

I would personally recommend the technology, as I feel it has the potential to save me a lot of money, whilst helping me limit my environmental impact, at the same time as letting me live slightly more comfortable.

Thank you very much for following the series, I hope it has been interesting and educational. I also hope it has been useful to people who are considering getting a Remote Heating Control system.

I would also like to say thank you for all the comments I have received on the articles during the course of the series. I am more than happy to answer questions and give my opinions, just ask anything you may have either on the relevant post, or below.

My final thank you goes to British Gas for letting me test out a technology of the future.

… and that’s the end of my second series! 🙂

Setting up and testing my heating schedule

This is the 150th article I have posted on Technology Bloggers!

This is the fourth in a series of articles in which I am exploring Remote Heating Control – a technology of the future. Learn more about this series by reading the introductory article, called stepping into the future of smarter living.

In the last few weeks it has been getting colder, and around a week ago, I decided that it was time to put my heating on. I would usually try to hold off until October, however this year, as I now have Remote Heating Control installed, I didn’t think about it in the same way. Why set a date before which you will not turn on your heating? If it is cold in September but warm in October, why not have your heating on in September and off in October?

With Remote Heating Control I can tell my heating to come on only when the temperature in my house drops below a certain level. I know it may sound odd, but I can have my heating scheduled to come on in July if the temperature drops below say 15°C. Is that likely? Probably not, however if it were to happen, I would be able to justify putting my heating on, as it isn’t the time of year that should govern my heating habits, I believe it should be the temperature.

Setting Up A Heating Scheduled

I was now ready to become one of the first people in the country to programme a heating scheduled via the internet!

To set a schedule is really simple. I login to myHome, and on the homepage click the heating box – remember from last time, there are two boxes on the home screen, temperature and heating. This takes you to the schedule screen where you can set your heating schedule.

The schedule is split into four sections, Sleep, Wake, Away and Home. Sleep covers late at night until early morning, Wake covers early morning, Away covers the day, and Home is the evening. These times are obviously just guidelines, and you can use them for whatever you want, but I imagine most people will use Sleep for when they are in bed, Wake for when they get up in the morning, Away for when they go out, be it for leisure, work, school or whatever, and Home for when they return.

That schedule plan worked for me, so I set mine. For the moment, as it isn’t that cold, I decided that at the time of day I want my house the hottest I would have it at 18°C – I don’t mind wearing a jumper, but I don’t want to freeze! That is in the evening and morning, when I wake up and return home. During the day I am out, so I don’t mind the house getting colder so I have set this to 8°C – no point heating empty rooms! Then at night, I want to be comfortable if I get up, however I should be in bed for most of it, so I have set the temperature to 15°C. It will keep the house from going cold but wont waste unnecessary gas.

The image below shows my heating schedule.

Remote Heating Control Simple Schedule - Simple View

My heating schedule

The image above shows the temperatures at which my heating will be triggered. You may notice that there is one schedule for weekdays, and another for the weekend. This is because of a weekend, you are likely to do different things than on a weekday, so you may want your heating different. If your days are all pretty much the same, then setting your heating via the Simple schedule is probably the easiest way. For me however I use the Advanced schedule option (see the blue tab at the top right of the image).

Below is my heating schedule as viewed from the advanced view.

Remote Heating Control Schedule - Advanced

My heating schedule – advanced view

As you can see, throughout the week my heating has slight daily variations. I can only make these changes on the Advanced heating schedule tab. Some noticeable variations are that on Monday morning, my heating comes on a little earlier than the rest of the week. This is because I have to get up slightly earlier. On a Friday and Saturday, my Home period lasts slightly longer, keeping my house warm later into the night, this is because I will usually stay up later on these days. Also on a weekend I am usually in the house all day on Sunday, so during the day my heating is at 18°C.

The brilliant thing about setting a schedule is that I can still change the temperature whenever I like. Say it is Monday and I come home at midday, my heating will only be set to come on if the house temperature drops below 8°C. When I arrive home I want the temperature to be 18°C though. The change is really easy to make, I just get out my phone and text HEAT ON 18 to a number British Gas have given me, and for the duration of that heating cycle (which would be Away) my heating schedule will be overridden and my house will stay at 18°C. When the next cycle (Home) starts, the heating schedule will automatically turn back onto the default temperature for that time.

I could also change the schedule via an app. Both Android and iDevice apps are available, so you can change your heating temperature via any iDevice or Android powered phone with an internet connection.

The heating temperature can also be altered from within my house on the smart linked thermostat, but it is often much more convenient to do it remotely – it means coming home to a warm house!

Hopefully you now understand how the schedule part of British Gas’s Remote Heating Control technology works. I have been using it for around a week now, and it has been really great. I have been getting up and it has been warm, and when I come home of an evening the house is already warm.

I am sure in the weeks to come when it gets colder, I will change the schedule, to make it hotter than 18°C, however at the moment, with the weather like it is seem to be just the right temperature to be comfortable whilst not wasting too much gas.

An interesting and useful tool that the myHome system has is that is tells you the temperature your smart linked thermostat has read in the recent past month. This means you can work out when your heating will have been triggered, and when it wont have because the temperature will have been above the ‘kick in’ level.

I am able to use the temperature history graph (reached by clicking on the temperature box on the homepage) to see what sort of temperature my house has been at recently, and judge against how I have been feeling (e.g. too hot, comfortable, nippy, cold etc.) the temperature it has been, to ensure that I only have my heating come on when I really want it to.

To conclude this article (4/6 in this series) I am really glad to have been asked to be a pioneer in testing the technology, as it is proving very useful at saving my money – we will have to wait for a bill to come through to try to see just how much.

Next Time

The next article in the series will go live on Friday the 19th of October, when we will be well into mid-Autumn, and looking at a 14 day forecast the temperature outside will be around 9°C where I live, so I will surely be using the heating every day, most of the time.

In the next article I will be talking some more about the other resources that are available behind the buttons on the myHome console. I will also be updating you as always on my experience of the system.

My first impressions of Remote Heating Control

This is the third in a series of articles in which I am exploring Remote Heating Control – a technology of the future. Learn more about this series by reading the introductory article, called stepping into the future of smarter living.

So far in the series, I have introduced Remote Heating Control technology, its capabilities and potential, and discussed the installation process, with specific reference to my installation. In this article I will be sharing with you my experiences and first impressions of using the technology.

Logging In For The First Time

Remote Heating Control really is a technology of the future. Why? How many parts of your home can you currently control via the internet? Probably non. In the future I believe that most of our home will be remotely controllable. Technologies like smart meters and Safe and Secure are all linked to the internet, meaning that you can secure your home or see what electricity you are using remotely. These are two new technologies which will also be making their way into our homes very soon, and are part of the future of smarter living.

So Remote Heating Control is a technology of the future, as you can now control your heating online.

To login to my heating (I know, at first it sounds a little odd and at the same time cool ‘logging in to your heating‘!) I have to go to this URL: https://myhome.britishgas.co.uk

This URL is British Gas’s myHome homepage, which is the portal that I will log into to change/check my heating. It is also the portal you would visit if you have Safe and Secure technology installed at home.

Basically, myHome could soon be where you go to control your homes heating and security.

British Gas myHome

myHome – where I now go to check and change the temperature of my house

I was given a handy User Guide by Nick (the British Gas engineer who installed my technology) which has been very helpful, as it contains practically everything I need to know about remotely controlling my heating. That said, as I am relatively technical and have found that as the interface is so easy to get to grips with, I have rarely had to refer to the User Guide.

After logging in for the first time, like I explained in my previous post, I had to get the devices to find each other. This is usually all done online, so you don’t need to actually change the device setup at all, the portal just connects to your devices and then synchronises them.

In my case it had been a while since my installation before I got round to setting up my online account. This meant that my smart linked thermostat had fallen out of pairing mode, so the hub was unable to find it. British Gas were more than helpful in getting me up and running, and I was given a personal contact (engineer Steve Plumb) who helped me get my system working. Being a techie, I took the initiative to see if I could get the smart linked thermostat homing again myself, by taking the batteries out, and then putting them back in again – hence restarting the device. It worked. I have no doubt that the phone call I had scheduled with Steve would have helped me solve the issue just as fast, but it felt good to solve it myself.

Tutorial

After all my devices were connected, I was presented with a four step tutorial, which explained how to use the technology.

The first step was a quick guide to the SMS control function. It let me know the commands I would need to control my heating when not in the house, or near an internet connection.

The next step gave me a link to download the app (iPhone and Android) that I can use to control my heating via smartphone.

Step three explained the homepage of the console, what everything meant and how I control my heating instantly – i.e. if I decide to make my house hotter/colder than my scheduled plan.

The final step gave me an explanation of how to set up a heating schedule.

Homepage

When I login to myHome, I am now presented with a very interesting screen, which is filled with data and options. At the top of the screen are some navigation links, and then taking centre stage are two main boxes: temperature and heating.

British Gas Remote Heating Control online homepage

myHome homepage – where I control my Remote Heating Control from

The temperature box lets me know the temperature inside my house at the moment (rounded to the nearest degree) along with the weather and temperature outside too. It also shows me the average temperature in my home today, and this week.

If you look at the image above you will see that my home must be pretty well insulated, as I am yet to have the heating on, and despite it being 17°C outside, inside it is a comfortable 19°C. The average temperature for my house today is 19°C, and in the last week it has been 20°C.

The heating box tells me the exact temperature inside my house right now to one decimal place – the same reading on my smart linked thermometer (18.5°C).

If I click on the temperature box it takes me to a page where I can view diagrams of what the temperature in my house was like over the last day, week and month. Very interesting and handy when setting a schedule

If I click on the heating box I am taken to a page where I can set up a day by day heating schedule. The weather seems to be pretty mild (at least where I live) at the moment, so I haven’t yet set up a heating schedule, as I don’t really need my heating on, so more on this next time.

Overall I am very pleased and impressed with my new online heating portal myHome. It is very well designed, is easy on the eye, and makes me heating seem a lot easier to control. I look forward to using the technology in the next week or so as the weather gets colder.

Next Time

In the fourth post in this series (launching on Friday the 5th of October) I will be exploring how remote the technology really is. I will discuss how to set up a schedule, and how easy or difficult I find that, along with how effective my remote commands are at affecting the temperature of my house, whether programmed via text, app, online or smart linked thermostat.