How to identify prevent and fix laptop overheating

For the last few years, the sale of laptops has increased by 25% whereas the sale of desktop machines has reduced. Along with increasing demand for laptops and a change in times, technology has been upgraded.

Day by day laptops are getting thinner, more compact, lighter, and better in terms of performance. Because of this, laptops are now being put into smaller and smaller casing, which increases the threat of overheating, as there is less room for air to circulate.

If your laptop overheats, it can cause permanent hardware damage or failure. In this article, I will try to teach you about how to identify, prevent and fix laptop overheating.

An overheating laptop

Symptoms of Laptop Overheating

Below are the three points which can help out to identify if your laptop is overheating.

  • Sudden shut-down, done by the operating system to prevent hardware damage
  • The fan speed increases – you should be able to here this
  • A reduction in the laptops performance – things load slower, the CPU is busy more often etc.

The Root Cause of Laptop Overheating

Laptop overheating occurs due to insufficient cooling. This usually happens because either your laptop is clogged up with dust, blocking ventilation, or because a thermal grease compound is getting stocked between your CPU and the heat sink – the big metal cooler that is usually linked to the fan.

Steps to prevent or fix Laptop Overheating

Option 1 – External cooler

You could purchase an external cooler. This is a cooling pad you place your laptop on, and it keeps cool air circulating around the laptop. Before you but a cooling pad, it is important to understand the flow of air in and out of your laptop.

Cooling pads are more useful/effective when used on laptops with air vents on the base of the device. Cooling pad connect via USB, and consumes some of the laptops power – not a problem if you are plugged in. Usually these pads cost around £5-20 GBP.

Option 2 – Get a strong and level base

Most laptops have their ventilation grills on the bottom of the device. Therefore if you keep them on an uneven surface, such as a bed, lap or pillow, disturbance is caused to the airflow. Keeping your laptop on a hard surface, like a table or a strong hard tray is likely to get you good air flow..

Option 3 – Internal cleaning

The above two methods were external methods, however this method will require taking your laptop apart and putting it back together again – so only do it if you are confident you know what you are doing!

This step is about removing your laptops casing to clean out any dust or dirt that might be restricting the airflow. Most laptops have downloadable user manuals, which can tell you all about the internals of your laptop, and how to take it apart, in order to clean it. This can void your warranty, so be careful and do your research! If you are not confident, you could of course take it to your local computer repair shop, and ask them to clean it.

If you are doing it yourself, once you have opened your laptop, you will need to clean the fans which provide cooling to graphics card and CPU. Before you do this, make sure that it is shut down and the battery is removed – don’t electrocute yourself! For thermal grease you may need to use a cotton swab, dipped in stain remover to remover.

For full, comprehensive instructions, research it yourself, and do not start opening your laptop up until you know what you are doing!

What is Synthetic Biology?

In my work I write about nanotechnology and synthetic biology and over the next couple of weeks I would like to describe what is happening in these high technology fields. I start with synthetic biology. I am not a scientist and cannot give any form of technical description of how they do what they do. I can present a kind of sketch though of what they are doing and their aims.

The first question then must be what is synthetic biology? Well it is something that can be described as engineering, biology, genetics or nanotechnology, the most common description is that of applying the concept of engineering to biological organisms. But what does that actually mean?

Well, synthetic biology aims to design and engineer biologically based parts, novel devices and systems as well as redesigning existing, natural biological systems. Practitioners use a systems approach, an organism is seen as a whole, or a system, and can therefore be engineered, very much like a machine.

you see, kid's stuff

The system is reduced to biological parts (bioparts) whose function is expressed in terms of input/output characteristics. Once these parts have been described in terms of their function, isolated, standardised and syntheticaly reproduced, they can then be combined to from new organisms, very much in the way that an engineer would build a machine using standard devices built from standard parts. It is just that they are parts of a living organism.

These standard parts are defined by their DNA, and this can be manipulated in order to make the perfect part for the perfect device. Parts of the DNA can be removed and synthetic pieces used to replace them. Create the right part that does the right job, put in it a carrier cell (known as chassis) and Bob’s your Uncle, you can start to construct your organism.

The Biobricks Foundation is a not for profit organization that aims to keep a register of these standard parts, maintaining open access and promoting technical standardization, something that is seen as holding the key to the further development of synthetic biology.

Obviously to do all of the above you require technical expertise, the process requires computational modeling in order to analyze the complexities of biological entities and to predict system performance. You require DNA sequencing in order to describe the genome and then of course DNA synthesis, to re-produce either part of or the entire genome itself.

But what are the potential areas of application for this technology, and what can they actually do now?

One of the main fields is undoubtedly medicine. Drugs can be produced that are more effective or have fewer or even no side effects, as the genomes of their active components can be adjusted and synthesized. An example is the development of a synthetic version of the anti-malarial drug Artermisinin that could be industrially and cheaply mass produced, and in the near future antibiotics could become much more efficient.

Another existing application is water that changes colour when in contact with different polluting agents making them instantly recognizable. Switches already exist that react to certain types of input. An example could be a cell that is part of a person’s body that reacts to the stimulus of a certain chemical that in turn stimulates the production of another. Imagine for example a device that reacts to a chemical produced by a cancerous cell. This input causes a reaction that produces another chemical to counteract this presence. All working naturally using the body’s energy to function.

Other developments involve the energy sector, the production of plants for bio mass that are not as wasteful as those used today and even the development of synthetic aviation fuels.

In other fields a synthetic form of the silk produced by the Golden Orb spider is under development. This is an extremely strong, fine and lightweight material that could lead the way towards new specialist engineering materials.

They are even working on living computer memory, and  this article describes breakthroughs and results in DNA computing.

Well this is nothing but reasonable, my memory lives in my brain and the memory of my ancestors in my DNA, and now they have the technology to read it and even change it, so why not use it in a computer?

I have written several articles on this and other related topics on the Bassetti Foundation website, and as I said I am no scientist, so all comments and criticism invited and accepted.

Technology and the future of gaming

A few weeks ago I wrote an article about how technology is going to impact the way we work in the future. Now I am going to let you into some treat that may be in-store for us, sooner than you might think, in the world of gaming.

More Family Integration

Critics believe that in the future, despite popular belief, gaming will not be more individual, each of us in separate rooms, but more communal, with entire families uniting, in order to play together.

This is mainly due to the rapid developments in home entertainment systems based on competition, and also movement. In 2006 we saw this trend start to develop with the launch of the Nintendo Wii. This immediately pulled people together to game, more so than ever before. Games like Wii Play, and Mario Kart have brought families (and friends) together to play across the world.

In 2010, Kinetic for the Xbox 360, adding further elements of full body participation to gaming. Later this year, Kinetic will be available for computers too. Also later this year, we are going to see the release of the Wii U, the next model of the Wii.

The Wii U

A preview at Nintendo’s new Wii: the Wii U

It is devices like the Kinetic and Wii that are making gaming more social, with even more exciting and innovative devices coming out soon, also aimed at bringing us together.

Mind Control

You read right, mind controlled games are much closer than you might think. Thanks to the developments of advanced brainwave sensors, it is now possible to control things using your mind. All you need is to wearing a simple headband and earpiece with the advanced sensors attached, as brainwaves can be captured and interpreted on your scalp.

In the near future, we could potentially have ditched the controller, and be doing battle with our minds. Games where the the more you concentrate, the better you do, are a leap forward that has been made, and will be released to the mass market very soon.

Mind control could work with all sorts of games, however currently the technology works best with simple ones, like a game of tug of war (the harder you think you pull, the harder you pull!) and archery – focus on the bullseye, and you are more likely to hit it.

Mind control can help to create a much more personal experience, when gaming. This technology can also be applied to movies. Multiple scenes can be shot, and depending upon your emotions and how you are reacting to events, you could see different things. Sound cool hu?

More Interactive Experiences

I have already talked about things like the Wii, and Kinetic, but other systems, like the the Trixter Xdream are going to revolutionise the way we play, and the way we keep fit. The Wii let us play golf and tennis in our living rooms, but it didn’t feel all that real, did it? The Xdream accurately simulates riding a bike outside, using a computer display and a modified exercise bike.

Trixter Xdream Exercise Bike

The Trixter Xdream exercise bike

This means that you can feel like you are going for an outdoor workout, on a real bike, but becoming totally immersed in the experience, in the comfort of your own home – you may need to open some windows to create the draft effect! The bike is currently on sale for around £6,000 GBP, however in the future more and more of these devices (which will get cheaper and cheaper) are going to make their way into gyms around the country, and also even our homes.

TVs are set to get smarter soon too, with firms like Samsung and Google revolutionising the way we use our televisions.

3D

3D has been around for a while now, decades in fact, however there has always been the need to wear glasses. In the very near future, we could see glassesless 3D TV’s in our homes, providing us with 3D entertainment with no goofy glasses.

This technology will be able to offer gamers total 3D immersion, making the experience feel even more real. Match that with motion technology and the gap between fiction and reality narrows even further.

To Conclude

There are so many other revolutionary technologies and products that are set to change the way we have fun in the future. I have written about just a few to wet your appetite for what is going to be appearing on the high street within the next few years.

By all means research this further, and if you find anything interesting, let me know!

Gaming is set to change, quite radically and quite soon. The question is are we ready for it?