Report from the Nanotechnology Lecture

Today I would like to look at some of the issues raised at the Nanotechnology lecture that I posted about last week.

The lecture was delivered by Michael Bruch, head of Research and Design of Allianz insurance company. He brought up some interesting points about nanotechnology and its production.

One problem that he raised is that we do not really know how much nanotech we are surrounded by as products containing engineered nano-particles do not have to be labeled.

Many cosmetics, sun creams and sports related products use the technique, but also food manufacturers, so it is really difficult to understand how much exposure we have to these particles. Scratch resistant paint and darkened windscreens are already here, but self repairing paint is also under trial, as is paint that changes colour.

Another problem is that their manufacturing processes are practically unregulated. Most of these materials are produced by small companies that have little or no safety procedures. And it is unclear what type of procedures would be of use.

This is because it is unclear how exposure affects the human body. These particles can enter the body in various ways, and have the capability of passing directly from the blood to the brain. This means that they can be used for medical cures such as in fighting cancer, but also that once in your body they can transfer everywhere.

Nanotechnology Lecture Panel - Jonny Hankins

The panel of speakers

Recent studies have found that exposure to nano carbon tubes does affect the heart in mice however, and similarities are drawn with asbestos as many of the fibres look similar. One complicating factor however is that materials used on a nano scale have different properties, so something that is inert such as gold might be toxic at nano scale or the other way round.

Further problems arise when we think about end of life treatment. Much of the expert knowledge is not passed down the line to those responsible for disposal of these products, so they may not be treated correctly when it comes to recycling or destroying them.

All of the above means that the nanotech industry brings with it an enormous amount of risk. Health risks are easy to see, but also environmental risks. We do not know how much is released into the atmosphere today, nor whether there will be industrial accidents and what their effects might be.

Regulation is difficult to draw up however as terms and definitions have not been agreed upon. Voluntary codes seem to be the only attempt at implementing some form of standardization.

What is safe to say is that this technology is certainly changing our lives, but that as it is developing so quickly little is known about how to treat it or the consequences it might bring.

I made a speech myself, the outline of which is below. Thanks to everyone who watched via streaming, the photos were taken from the live stream by Christopher.

Jonny Hankins nanotechnology lecture

Me at the lecture

Comment by J Hankins of the Bassetti Foundation at the Bocconi University in Milan.

I would agree with previous comments that there is definitely a role to play for insurers in innovation.

I would also argue that the lecture Dr Bruch has just delivered is not only about innovation, but also about responsibility and obligation.

Innovation is a complex phenomenon combining science, technology, finance, management, enterprise and organizations to achieve a goal that is not only scientific but also entrepreneurial and political. The ultimate use of any results will be outside science, even though they greatly need the contribution of science, in what is by definition a continuous process.

Taken literally, innovation is something that comes about when an advance in knowledge, which is a result of a discovery, is accompanied by and combined with technology, and the power to put that advancement into practice (capital). It is not simply discovery. It is something more than that. It is part of a new historical situation arising from a combination of knowledge, technology, know-how, and the risks/opportunities developed and implemented by business or other powers. That is, it is something that was not there before and which has come about through a “new” combination of knowledge and power, bringing change into the social world. This change is appropriated, negotiated, lived through, or fought, by people – whether as citizens or as consumers.

Innovation, however, is also creativity, which necessarily implies unforeseeable change. It implies increased risk/opportunity and social power. It leads to unpredictability in the socio-political field (new institutions, types of relationship, of production, of war, and new powers), in the technical and economic realms (new materials, sources of energy, tools and categories of goods), and the cultural-aesthetic field (new styles, fashions, tastes and habits).

If we look at the interest that governments currently show in nanotechnology development this relationship to power becomes easier to see. As an agent of change, risk is intrinsic to all innovation, and I would argue that it should be carried out responsibly.

The development of nanotechnology in some ways exemplifies the problem of responsibility in innovation perfectly. As we have seen in Dr Bruch’s lecture, developments in the medical field offer new treatments for cancer, in engineering we are seeing ever lighter and stronger construction materials, and these advances will continue to ever more change the way we live and our surroundings.

But as stated, these developments are not without risk, and risk requires responsibility to be taken.

It is the entire process of innovation that must be responsible through the actions of all involved in it, in all of their different roles. It would help to have a societal understanding and a political framework in place for collaborative deliberation and for a collective capacity to rethink the fundamentals of our own premises and assumptions as we go along, changing the world we live in.

I would argue that Dr Bruch’s presentation can be seen as a call for responsible innovation in its entirety. In some ways he is saying that a company can only insure you if you play your part, as the innovator you must be transparent and thorough. But the cover is also reliant upon other actors. The consumer must be educated and informed so that when they purchase something they do it knowingly. This requires reliable information on the part of the media as well as an absence of political manoeuvring. The regulator figure is also necessary, as they must inform and orchestrate the communication that underlies their decision making and intervention.

The fact that insurance cover is seen as necessary before investment means that companies that cannot find insurance cover have difficulty securing funding for their products. This puts the insurance companies in an interesting position, as they have a direct influence on the innovation process. In some ways they become the gatekeeper, allowing those that display best practices to pass, and those who may not demonstrate an appreciation of the consequences of their work may find finance difficult.

If we look at the risk analysis in Dr Bruch’s lecture we find that it is necessarily very widely drawn, sometimes even vague as the spectrum of possible effects is large and the time scale immeasurable. This does not mean however that it is not important or should be overlooked however.

If we have no loss history, as in the case of nanotechnology, how can we measure the risk involved? Can we gain foresight? Can we use the experience of the insurance industry to create an algorithm for future risk that is not based on case history. If so could we in fact do the same for responsibility?

The examples of needs and obligations given in Dr Bruch’s lecture are not only applicable to nanotechnology however. The process required for the adequate testing of exposure levels, medical studies, political decisions, the drawing up of regulation and its implementation are present throughout society. We cannot believe that ad-hoc regulation is an answer, because by definition it can only be implemented late on in the innovation process, when the factors that may be foreseeable have been measured, standardized and formalized, and we should remember that many other factors that are more difficult to see will also play their part.

Regulation is necessary, but if we accept that it can only appear late in the innovation process it cannot be the basis for our goal. The innovation process itself must be imbued with responsibility, its design and implementation must try to take implications for the future of present actions into account.

As Dr Bruch mentioned perceptual risk is also an issue that needs to be addressed. Here we move into the political arena, an arena that should certainly not be overlooked given the influence of national, international and global politics in nanotechnology. The management of the perception of risk is as real as the management of risk itself, as perception affects decision-making.

If I could raise some questions to the audience I would like to think more about ‘stewardship’, the responsibility insurance companies hold in granting cover to operators in the nanotech industry and how a premium can be calculated in the face of such uncertainty and indeterminacy.

12 thoughts on “Report from the Nanotechnology Lecture

  1. Christopher (admin team)

    Good article Jonny. It was really interesting to take part in the lecture virtually!

    Until the lecture I never really truly understood the dangers of nanotechnology, and the potential implications of its use. It is quite scary to think that there isn’t very strict regulation of nanotechnology, as the implications are unknown…

    I suppose you could draw a similarity to GM food, people don’t know the risks, so many countries have banned it. It may be perfectly safe, but caution is needed. This doesn’t appear to be the case with nanotechnology – which is worrying :-/

    Well done on your lecture, you raised some very important points!

      • Christopher (admin team)

        Well I think you did remarkably well, especially as the whole world (okay, me and probably a few dozen other people) was watching via the internet!

    • Well thanks for watching, and also thanks for putting the link to the stream. It went very well and I think some interesting points were raised by all the speakers.

      • Christopher (admin team)

        “It went very well and I think some interesting points were raised by all the speakers.” – Exactly hence why I put a link to the stream 🙂

  2. I really like the idea of self repairing paint however I’m not sure if the benefits offset the potential risks. It’s also difficult to understand how insurance companies can determine the level of risk unless they have a detailed understanding of the science itself.

    • This is the point of the debate I think, there are incredible possibilities but also risks. Self repairing paint might not hit the mark for you, but what about tomato Ketchup that doesn’t stick to the plate or the bottle? Paint that changes colour? In my piece I tried to outline the difference between risk and uncertainty and indeterminacy. If you know the possible problems and have some idea of occurrence you can measure the risk, but if you do not know how often the problems will occur or even what the problems might be you cannot measure the risk. Some companies cannot in fact get insurance because of this. But engineered nanoparticles are present in almost every industry you can think of, so if Samsung are insured or Ford or Vegemite they are probably covering nano developments.

  3. I never knew that all these routine or rather usual elements of our day-to-day lives are actually influenced by nano-technology.
    Self-repairing paints is great idea, now all the walls will not have to be of the same color for a long long time. It’s really good to know that nano-technology holds such a strong ground in technology vertical. Though, I never opted for nano-tech as a subject in my grads just to run away from it I think I’m still wrapped around by this crucial technology. 😉
    Thanks for sharing.

    • And thanks for taking the time to comment. We just need a greater understanding and awareness of potential risks and problems.

        • well thank you. I consider myself fortunate to be able to post every week on such a well run blog, and that is something to give Christopher credit for.

          • Christopher (admin team)

            “well run” – most of the time 😉

            Thanks Jonny, I try to keep everything looking good and do my best to make sure that their fresh content out every day or two, but sometimes there just aren’t enough hours in the day 😛

Leave a Reply

Your email address will not be published. Required fields are marked *